|
|  |
18 inch COMBO SPINNER/STAND PACKAGETired of the spinner targets available today? Introducing the first component spinner target system. Shoot paper or cardboard targets in the morning, then switch to spinners using the same target stand in the afternoon. This is our combo offering: Includes 1 Load & Lock It 18inch stand + cross bar, uprights,and all hardware. Add desired spinners(AR400 steel) in drop down menu. Clamps to keep the spinners in position are available.(1/4-5/8 hose clamps)Holds 3 comfortably IF ORDERING MORE THAN 1 SET-UP BE SURE TO ORDER TOTAL AMOUNT OF SPINNERS DESIRED PER SET-UP.More spinners available soon. Only 3 inch available currently. Got Questions about the Ultimate Spinner? E-Mail Us
Click Here for More Info SPINNER WELDS ARE GUARANTEED AGAINST FAILURE-SPINNERS COME UNPAINTED
|
|
|
|
|
|  |
Spinner Set-Up Only-No StandIf you already have one of our target stands, then this is for you. Includes: Metal uprights, cross bar, and all hardware. Just choose your spinners(AR400 stee)) in drop down menu to complete set up. Shown are spinners using hose clamps to keep the spinners in position.(1/4-5/8 hose clamps)NOTE: If you have a ProRange Model(the model with heavier walled upright supports), you will need .765" clearance in upright supports for spinner uprights. This can vary from mill to mill, so check this before ordering. Color may vary. COMES UNPAINTED.
|
|
|
|
|
| |
22 inch COMBO SPINNER/STAND PACKAGETired of the spinner targets available today? Introducing the first component spinner target system. Shoot paper or cardboard targets in the morning, then switch to spinners using the same target stand in the afternoon. This is our combo offering: Includes 1 Load & Lock It 22 inch stand + cross bar, uprights,and all hardware. Add desired spinners(AR400 steel) in drop down menu. Clamps to keep the spinners in position are available.(1/4-5/8 hose clamps) Holds 3 comfortably CLICK HERE FOR MORE INFO IF ORDERING MORE THAN 1 SET-UP BE SURE TO ORDER TOTAL AMOUNT OF SPINNERS DESIRED PER SET-UP. Got Questions about the Ultimate Spinner? E-Mail Us
Click Here for More Info SPINNER WELDS ARE GUARANTEED AGAINST FAILURE-SPINNERS COME UNPAINTED
|
|
|
|
|
|  |
Extra Spinners 1/4 AR400 PAIR 1/4" thick AR400 steel, 3inch diameter gong, PAIR, FREE SHIPPING ON THIS ITEM.-SPINNERS COME UNPAINTED
|
|
|
|
|
|  |
Hold Down Stakes-1 Pair(2)If you think you need to stake down the legs we make these available in 2-packs. Stands are drilled to accept. Shipping included for up to two 2-packs. 3 or more 2-packs add $.99 for shipping (We will add this charge offline)Only sold with target stand orders.(Please note that some shooting ranges use road base and do not allow anything to be pounded into surface!)
|
|
|
|
|
|  |
Expedited ManufacturingNormal shipping takes place 3-5days after order is placed Expedited MFG means someone stays late to weld,grind, and/or paint stands. $5.00 per stand. If you are ordering a 2-pack be sure to put 2 of this item and so on... Any add-ons(targets,ect) will be expedited as well with no additional charge.
|
|
|
|
|
|  |
Clay Pigeon Hangers 5-packThese nifty clay pigeon hangers simply clip on to cross bar and clay pigeons. These hangers are very hard to damage because they are so thin. Free shipping with Ultimate Spinner set up. Can also be hung from a length of rope strung from 1x2 furring strips.
|
|
|
|
|
|  |
AR 500 Steel 6 inch -Target single(1)3/8 inch thick, 6 inch square laser cut, and laser drilled AR500 hardened steel. Drilled for hanging. Hangs easily on spinner set up. Pictured is a plate hung from a Spinner Set-Up with S hooks. WE USE THREADED ROD INSTEAD OF CHAIN BECAUSE ITS CHEAPER TO REPLACE THAN CHAIN! COMES UNPAINTED. Use this steel for combo rifle/pistol/shotgun
|
|
|
|
|
| |
AR 500 Steel 6 inch -Target-pair(2)3/8 inch thick, 6 inch square laser cut, and laser drilled AR500 hardened steel. Use this steel for combo rifle/pistol/shotgun.Drilled for hanging. Hangs easily on spinner set up. Pictured is a plate hung from a Spinner Set-Up with S hooks. WE USE THREADED ROD INSTEAD OF CHAIN BECAUSE ITS CHEAPER TO REPLACE THAN CHAIN! COMES UNPAINTED. Use this steel for combo rifle/pistol/shotgun.
|
|
|
|
|
|  |
AR 400 Steel 6 inch -Target single(1)3/8 inch thick, 6 inch square laser cut, and laser drilled AR400 hardened steel. Drilled for hanging. Hangs easily on spinner set up. This is an ideal size for pistol training. Tested to .44 Mag. Pictured is a plate hung from a Spinner Set-Up with S hooks. WE USE THREADED ROD INSTEAD OF CHAIN BECAUSE ITS CHEAPER TO REPLACE THAN CHAIN! COMES UNPAINTED Use this steel for most pistol fire
|
|
|
|
|
| |
AR 400 6 inch -Target-Pair(2)3/8 inch thick, 6 inch square laser cut, and laser drilled AR400 hardened steel. Drilled for hanging. Hangs easily on spinner set up. This is an ideal size for pistol training. Tested to .44 Mag. Pictured is a plate hung from a Spinner Set-Up with S hooks. COMES UNPAINTED Use this steel for most pistol fire.
|
|
|
|
|
|  |
THE WHOPPER6X6 3/8inch with pivot welded on. This one is shown mounted on a spinner set-up. NOTE: Because of weld to weight ratio, we cannot guarantee that weld won't fail eventually. However plate is still drilled for hanging and can be hung several ways from cross bar,ie.,hose clamps, S Hooks, carabiners or even chain.COMES UNPAINTED
|
|
|
|
